How to Tie Work Boots

How to Tie Work Boots? All You Need to Know

Learning how to tie work boots is a trick that you have to master if you want to avoid becoming a safety hazard. Aside from saving you plenty of time, since you can focus on your job and don’t need to tie and untie your work boots from time to time, you can also secure your feet.

There is no need for you to worry about getting injured when at work just because you were unable to tie your work boots properly and securely.

How to Tie Work Boots

Step 1 – Try the Heel Lock

If you often experience having heel blisters, especially if your job requires a lot of walking and moving, then it’s probably due to your heel lifting up each time you step forward or when it rubs on the inner part of your boot. Such friction triggers blisters that often develop at the back parts of your feet.

You can solve this problem by tying your work boots using the heel lock. Instead of the usual diagonal lacing that you do back and forth, the heel lock makes use of open hooks at the side of the footwear. Such is a huge help in creating a pulley-like system that can provide a mechanical advantage.

With it, it’s possible for you to crank down even the toughest and most resistant plastic or leather work boots. That said, expect it to lock your heel firmly in its place.

The lacing technique, which you can do using the guidelines in the video below, works efficiently in getting rid of heel lift. You can use it on any boot, shoe, or trail runner where you experience problems about heel lift.

Step 2 – Do the Surgeon’s Knot

You can also use another efficient technique on how to tie work boots, the surgeon’s knot. This technique works like the typical overhand loop frequently used in tying shoes. However, it does not just require you to do the loop once then pull it tightly.

You need to do it twice or thrice and produce a lace lock based on friction, which has a lower risk of slipping loose once you let it go. The good thing about the surgeon’s knot is that it lets you isolate various parts of the laces from each other. Such aids in producing looser or tighter areas.

This is beneficial if there are specific parts where you need to loosen or tighten. For instance, for sore spots, you can tighten the laces below then use the surgeon’s knot to lock them. You can then loosen the laces on the part above the sore spots. To do the surgeon’s knot, use this video as a guide.

Step 3 – Create Lacing Windows

You can also do the lacing windows if you want a more counterintuitive technique when it comes to tying your work boots. This technique requires you to break the traditional way of diagonally tying the laces back and forth.

In this technique, you are not going to thread the lace diagonally. What you ought to do is vertically threading it to the next high eyelet of your work boots. Doing such step can help produce a gap, which relieves pressure on the upper part of your feet.

This technique is ideal for you if you have a high arch. You can also use it if you want to deal with sore spots usually affecting the topmost part of your feet, especially if you tie the laces too tightly.

Step 4 – Use the Spiderweb Lacing Technique

Aside from securing your feet inside your work boots, this technique also looks great, so it’s a good way to leave a good impression at work. Here are some steps to do it:

  • Find the second from the bottom eyelet then start from there. Thread the laces through horizontally from beneath. Once done, you can thread the laces straight down and continue doing so through the bottom eyelets.
  • The next step is crossing the laces beneath then threading them coming from inside out and through the third from the bottom eyelet. Avoid crossing over. What you have to do, instead, is tucking them beneath the vertical line then moving from outside to the middle.
  • Allow the lace to cross over then thread the next eyelet up. Avoid letting them cross over afterward. Just thread them beneath the vertical line then moving from outside to the middle part of the work boots.
  • Cross the laces again then thread them through the following eyelet from beneath. Do the same steps again until you reach the top. Once done, you can tie your boots like you normally do.

Step 5 – Learn Some Additional Tips

  • Be consistent with crossovers if you want to prevent the result from getting messy. You can do so by ensuring that you cross left over right or vice versa all the time, or alternate always.
  • If you want to produce a symmetrical look, then try reversing the crossovers on your other work boot.
  • Check whether the knot sits straight across your work boots and is secure. Such is a sign that you tied it correctly.


How to tie work boots is not that overwhelming if you’re fully aware of the basic steps of the process. You can even integrate your own style. The goal is to keep your feet secure and comfortable so you can focus more at work and improve your productivity.

Similar Posts

Leave a Reply

Your email address will not be published.